Search results

• Straps add 12” to total length of suspenders
• Backstrap adds up to an extra 6” between bags in back
• Made in USA!

Expertly crafted from all leather, the 2 Pouch Pro Fastener Bag offers a balanced, job-ready layout for tool belt setups. It features a dedicated tape pocket, two roomy lower pouches, and multiple holders for layout tools and fasteners.

With storage for a 1" blade square, angle square, driver bits, and cat’s paw, this pouch delivers efficient access and streamlined organization—ideal for framing, finish work, or general carpentry.

Available for left- or right-hand dominant builders.
Made in the USA.

A go-to for quick tasks and finish work, this compact leather tool holder keeps your utility knife, 2 pencils, and a 35’ tape (or 25’ FatMax) close at hand—without the bulk. It also functions as a solid holster for chalk lines, making it a versatile addition to your belt setup.

Crafted from high-quality leather and built for real-world wear, this streamlined holder is ideal for those who want a lightweight, efficient solution for everyday tools.

Note: Leather requires break-in. Tapes like the FatMax with rubberized shoulders may take extra time to seat properly. You may also need to remove the clip from the tape for a proper fit.

The Leather Concrete Hook is purpose-built for concrete workers, with a custom metal hook designed to securely hang edgers or other tools with larger handles. The tunnel loop design fits belts up to 3" wide, making it easy to add this holder to your existing rig.

Made in the USA.

Pro Trimmer Fastener Bag keeps your most-used fasteners and layout tools right where you need them. Ideal for trim and finish work, this compact leather pouch includes storage for 2 nail sets or driver bits, a 1” blade square, and a cat’s paw sleeve—all in a streamlined layout suited for light framing or interior work.

Made in the USA.

A compact, all-leather pouch with a clean interior—no tool holders, just versatile storage. Ideal as a third bag for your rig or for carrying loose fasteners and small tools. Simple, durable, and built to do the job.

Made in the USA.

Leather Holster for Offset Snips & Pruning Shears – Made in USA

Keep your most-used cutting tools secure and within easy reach. This durable leather tool holster is designed to fit offset metal snips like the Wiss M6 and M7, as well as pruning shears and other similar tools. Crafted in the USA from high-quality American leather, it's built to stand up to tough jobsite conditions and long-term use.

Whether you're a steel framer, contractor, landscaper, or weekend DIYer, this holster offers a professional-grade solution to keep your tools ready at your side.

Classic 3-Pouch Tool Bag

A variation of our most popular design, this 3-pouch leather tool bag includes all the features of the 5018DB—minus the tape holster. It offers double outer bags and dedicated holders for a hammer, pencil, work knife, chisel, torpedo level, and lumber crayon.

Available in left- or right-hand configurations to suit your workflow.

Made in the USA.

Kit is available to replace worn snaps on our 5009 and 5055 suspension systems. Copper, hand settable rivets are provided to re-rivet rear snaps.

Includes: 4 Snap Clips, 5 Copper Rivet & Burr pairs and instructions on hand setting copper rivets.

The Large Pro Leather Utility Bag is our deepest, all-leather pouch—built for tradespeople who need generous, open storage without built-in tool holders. Ideal for carrying fasteners, bulky tools, or specialty gear that doesn’t fit a standard pouch layout.

Minimalist by design and jobsite-ready.

Made in the USA.

Carry your cat’s paw the way you want—secure, snug, and out of the way.
This handcrafted leather Cat’s Paw Sleeve Kit offers a clean, low-profile solution for tradespeople who prefer their tool tight to the body. Easy to install, this sleeve mounts to your existing pouch, vest, or tool rig using the included copper rivets and step-by-step instructions.

The sleek sleeve design keeps your tool secure while eliminating swing or bulk, making it ideal for high-mobility work like framing, roofing, and finish carpentry.

Made in the USA with premium leather and pro-grade durability.

The most popular bag in the OxyLights™ line, this 3-pouch leather tool bag provides smart storage without extra bulk. It includes holders for pencils, work knife, lumber crayon, chisel, torpedo level, and hammer, along with a built-in tape holster sized for up to a 35' FatMax.

Available in left- or right-hand configurations to suit your workflow.
Lefty option available in Hunter Green only.

Made in the USA.

Special Edition Multicam® now available!

Designed for right-side carry, the Clip-On Builders' Vest Tool Bag keeps your essential tools close and accessible. It features 9 pockets and holders for pencils, work knife, chisel, torpedo level, lumber crayon, and includes a heavy-duty hammer loop.

Built to clip directly onto the 2536 Builder’s Vest, this bag is reinforced with OxyRed leather corners for extra durability. Compact and efficient for streamlined jobsite use.

Made in the USA.

Small footprint. Big function.
The Electrician’s Pocket Caddy is the perfect companion for estimating, troubleshooting, service calls, or trim-out work. Designed specifically for electrical professionals, this all-leather pouch delivers five tool pockets and holders in a compact, streamlined design.

A dedicated pocket fits most compact testers, while a snap-loop allows you to hook it over a belt up to 2" wide—or carry it as a standalone pouch when you're on the go.

Made in the USA. Created for electricians who value mobility and efficiency.

Clip-On Hammer Holder – Leather & Steel | Made in the USA

Built tough from premium leather and heavy-duty steel. Whether you're on a ladder, moving between tasks, or working overhead, this holder clips on quickly and holds strong—no need to remove your belt.

Built for professionals and serious DIYers who need fast tool access on the go.

Designed for durability and efficient access, this round-bottom fastener bag offers a deep main pouch and layered outer storage. It includes holders for a tri-square, cat’s paw, driver bits, angle square, and a tape pocket that fits up to a 35’ tape.

Includes the Oxy Tool Shield for safe storage of sharp tools.

Compatibility Note: Fits the HD 3" Ranger Leather Work Belt, 2" Leather Work Belt. The side-by-side upper pouch and tape holster require a wider upper hanger on this one, so it will not fit the ProFormance and Stronghold Comfort belts or the Suspendavest or other beltless systems.

Made in the USA.

This durable half apron is built from #8 cotton duck canvas with leather pocket accents for a balance of flexibility and ruggedness. Lightweight and low-profile, it’s ideal for everything from weekend gardening to light carpentry or site work. Nine total pockets—six canvas and three leather—keep tools and supplies secure but easy to access. The 1.5" wide belt adjusts to fit waists from 24" to 54".

Made in the USA.

The Electrician’s Tool Pouch is a compact, belt-worn leather pouch designed for core tool access for electrical work. With 15 pockets and tool holders, it offers room for screwdrivers, pliers, and other essential tools—plus thoughtful details like a flashlight loop, electrical tape chain, quick-release tool snap, and a heavy-duty hammer holder.

Equipped with a tunnel loop mount that fits belts up to 3" wide, this pouch delivers solid on-belt performance without excess bulk.
Made in the USA.

This lightweight, low-profile tool belt set is purpose-built for finish work, trim carpentry, and light framing. At just under 4 lbs unloaded, it features foam-core main and outer bags that hold their shape whether full or empty—crafted from durable, abrasion-resistant industrial nylon.
Fully adjustable to fit waist sizes 32" to 40", it adapts quickly for seasonal clothing changes. Left-side fastener bag includes a patented* 2-in-1 outer pouch and speed square holster. Right-side tool bag has storage for hammer, chisel, knife, driver bits, and other essentials.
Includes a removable High Mount Hammer Holder (5059) and two Oxy™ Tool Shields (Model 2003).

Made in the USA.

A go-to for framers and carpenters, this classic black leather fastener bag balances storage and accessibility.

Offers side by side 35' tape holster and an upper bag with external sleeve pockets, drill bit holsters, and an angle square holster. An Oxy Tool Shield included for sharp tools. Reinforced stress points in the main bag ensure long-term durability.

Fits the HD 3" Ranger Leather Work Belt, 2" Leather Work Belt. The side-by-side upper pouch and tape holster require a wider upper hanger on this one, so it will not fit the ProFormance and Stronghold Comfort belts or the Suspendavest or other beltless systems.

Made in the USA.