Sort by:
Meet the Special Edition Multicam® OxyLights™ Framer Setup — a bold new colorway in one of our most popular tool belt systems. This set combines industrial nylon and leather for a lightweight, durable tool belt system. Designed for framing and general carpentry, this set includes two three-pouch bags, a hammer holder, and a heavy-duty Ranger Work Belt. Padded nylon pouches hold their shape, and reinforced leather corners increase longevity.
Made in the USA.
Belt Set Components
The most pouches offered in the Leather Beltless Series. Includes the 5156 Cradle Hammer Holder on rear.
Features
- Maximum Comfort: Wide padded shoulder support lined with Dri-Lex to wick away perspiration.
- Freedom of Movement: All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution: Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter: 25 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed: Lessen fatigue and help prevent lower back pain!
- One Size Fits Most*
- Made in USA!
* The big & tall builder (over 6'2") may need our expansion kit #5045 for proper fit.
Specifications
- Pockets & Tool Holders : 25
- One Size Fits Most*
- Weight : 7.3 lbs.
- Straps add 12” to total length of suspenders
- Backstrap adds up to an extra 6” between bags in back
- Made in USA!
The Stronghold Big Oxy Tool Belt Setup is purpose-built for pros who demand maximum tool capacity, organization, and heritage-grade construction. Featuring our largest leather bags with innovative round-bottom design, this rig offers generous storage across three inner walls—surpassing traditional pinch-bottom designs in both capacity and durability. Includes the 2003 Oxy Tool Shield and 5020 2-in-1 Tool & Hammer Holder for added versatility and tool protection. Built for those who work hard and expect their gear to do the same.
Made in the USA.
Components:
This premium 5" work belt is built for all-day comfort and support. Handcrafted in the USA from 12–14 oz. OxyRed and Black Latigo leather, it features a padded wool liner for moisture-wicking comfort, a 2" all-leather overbelt to secure tool bags, and nickel-plated steel hardware. Suspender attachment loops are included for those who carry heavier loads on the job.
Stronghold Journeyman’s Tote features a divided interior with 16 screwdriver loops, 9 center compartments, and multiple exterior pockets and loops to keep tools standing and organized.
Includes a leather luggage handle for comfortable carry, reinforced bottom for long-term use, and steel D-rings for optional shoulder strap attachment. Comes complete with a snap clip, clip-on location strap, and a 9501 Clip-On Bag for additional fastener storage.
Bonus: Two Oxy Tool Shields (Model 2003) included.
Made in the USA.
Designed to reduce strain without adding bulk, the Stronghold Light Suspenders deliver dependable support in an ultra-lightweight package. Built from industrial-grade nylon with leather loop attachments and heavy-duty spring clips, they’re ideal for long days on the job when comfort and mobility matter.
Chest-height pockets keep pencils or clip-on tools within easy reach, while the streamlined design pairs cleanly with Stronghold and compatible belts.
Installation note: For installation on additional belts, use Installation Kit #5509.
Compatibility: If you are going to use suspenders with the 5191 - Pro Carpenter's 5 Bag Tool Belt Setup, you will need the DAK - Direct Attachment Kit to connect them.
The Stronghold Master Carpenter Case delivers high-capacity organization in a compact, upright design. Crafted with a leather main body, water-resistant rubber base, and a hand-shaped leather handle, this tool tote is built for durability and ease of access.
Includes a removable 5042 Tape Holster, 9501 Clip-On Pouch, 2 Oxy Tool Shields, rafter square holster, and a side zip pouch for bits and small parts. Three internal compartments and 45 tool holders keep everything visible, accessible, and secure.
Made in the USA.
The SuspendaVest may be used for framing, electrical, concrete or trim applications. Fully adjustable with extra pockets behind the tool holders for hands or gloves. Snaps on and off in seconds with a quick release chest strap buckle. Features a “D” ring for hanging storage!
Features
- Maximum Comfort: Wide padded shoulder support lined with Dri-Lex® to wick away perspiration.
- Freedom of Movement: All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution: Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter: 17 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed: Lessen fatigue and help prevent lower back pain!
Specifications
- Pockets & Tool Holders : 17
- One Size Fits Most
- Weight : 3.0 lbs.
Caution: One size does fits most but if the user is XXL or more the vest might not be able to adjust enough to fit.
The 5055 Stronghold® Suspenders are built for all-day comfort, weight distribution, and rig stability. Featuring a padded, contoured yoke lined with moisture-wicking Dri-Lex®, these suspenders relieve hip and lower back strain while keeping straps secure across your shoulders.
Designed with tool-friendly chest pockets, an adjustable fit, and a heavy-duty D-ring for hanging up your rig. Ideal for professionals who need serious support without compromising comfort.
Made in the USA.
Compatibility: If you are going to use suspenders with the 5191 - Pro Carpenter's 5 Bag Tool Belt Setup, you will need the DAK - Direct Attachment Kit to connect them.
⚠️ Note: D-ring not rated for safety harness use
It’s all about tool organization with this case, featuring 18 pockets and tool holders in a compact footprint designed to keep essential tools accessible and upright. The interior is divided by four rigid walls with a leather-lined bottom for extra durability and structure.
Includes 2 Oxy Tool Shields (Model 2003) for safely storing sharp tools like chisels or knives. A solid choice for finish carpenters, plant engineers, and anyone who needs efficient tool access on the move.
Made in the USA.
Quick disconnect 3" wide leather belting accepts any tool bag with a tunnel loop up to 8.5" across. Create a custom rig to fit your specific work habits and needs. You may remove your bags from the SuspendaVest™ for finish work or work in tight spaces. Give your body a break, alternate with this belt free system.
The SuspendaVest may be used for framing, electrical, concrete or trim applications. Fully adjustable with extra pockets behind the tool holders for hands or gloves. Snaps on and off in seconds with a quick release chest strap buckle. Features a “D” ring for hanging storage!
Features
- Maximum Comfort -Wide padded shoulder support lined with Dri-Lex to wick away perspiration.
- Freedom of Movement - All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution - Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter - 17 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed - Lessen fatigue and help prevent lower back pain!
- Made in USA!
Specifications
- Pockets & Tool Holders : 17
- One Size Fits Most
- Weight : 3.0 lbs.
- Note: Due to extra wide hangers, the SuspendaVest does not accommodate the 5525 or B5611 bags.
- Caution: One size does fits most but if the user is XXL or more the vest might not be able to adjust enough to fit.
Also available for lefties in LH option here.
The SuspendaVest may be used for framing, electrical, concrete or trim applications. Fully adjustable with extra pockets behind the tool holders for hands or gloves. Snaps on and off in seconds with a quick release chest strap buckle. Features a heavy duty "D" ring for hanging storage.
Features
- Maximum Comfort: Wide padded shoulder support lined with Dri-Lex to wick away perspiration.
- Freedom of Movement: All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution: Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter: 36 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed: Lessen fatigue and help prevent lower back pain!
- Made in USA!
Specifications
- Pockets & Tool Holders : 36
- One Size Fits All
- Weight : 5.7 lbs.
Also available for lefties in LH option here.
Showing 182/202
NextRecently viewed products
Hand Crafted in the USA Since 1980
Hand Crafted in the USA Since 1980
