Search results
123 results
Search results
The OxyLights™ 7-Bag Framer Tool Belt offers the most pouches in the OxyLights Series. This setup mirrors the layout of the 5089 leather system but is built using a blend of abrasion-resistant industrial nylon and top-grain leather to reduce weight without sacrificing durability.
OxyRed™ leather reinforces stress points and provides secure NoSpill™ tool holders. Designed with hand-specific layout for smooth workflow.
Available in configurations for left- or right-handed builders.
Made in the USA.
Components:
A go-to for framers and carpenters, this classic black leather fastener bag balances storage and accessibility.
Offers side by side 35' tape holster and an upper bag with external sleeve pockets, drill bit holsters, and an angle square holster. An Oxy Tool Shield included for sharp tools. Reinforced stress points in the main bag ensure long-term durability.
Fits the HD 3" Ranger Leather Work Belt, 2" Leather Work Belt. The side-by-side upper pouch and tape holster require a wider upper hanger on this one, so it will not fit the ProFormance and Stronghold Comfort belts or the Suspendavest or other beltless systems.
Made in the USA.
The Pro Trimmer Tool Bag offers a compact, efficient setup for trim and finish work, with the durability to handle light framing as well. Internal holders keep your pencil, chisel, knife, and lumber crayon organized, while the exterior tool snap and heavy-duty hammer loop provide fast access to daily-use gear.
Built for precision work.
Made in the USA.
Small footprint. Big function.
The Electrician’s Pocket Caddy is the perfect companion for estimating, troubleshooting, service calls, or trim-out work. Designed specifically for electrical professionals, this all-leather pouch delivers five tool pockets and holders in a compact, streamlined design.
A dedicated pocket fits most compact testers, while a snap-loop allows you to hook it over a belt up to 2" wide—or carry it as a standalone pouch when you're on the go.
Made in the USA. Created for electricians who value mobility and efficiency.
Hybrid Fastener Bag | Leather & Nylon 4-Pouch | USA Made
This hybrid fastener bag combines the durability of full-grain leather with the flexibility of industrial nylon. The all-leather main pouch is paired with a dual-compartment outer bag made from tough, jobsite-grade nylon. Six black leather tool holders provide storage for layout tools and accessories, while the four-pocket design offers ample space for wire nuts, couplers, and other fittings.
Made in the USA.
Heavy-duty utility with trade-ready details.
The Canvas Bold Bag is built for hard use with a #4 duck canvas body, leather-reinforced bottom panel, and 1000D nylon binding to protect wear points. Dual bull pin loops on each side provide extra storage for riggers and steelworkers.
A tunnel loop fits belts up to 3" wide, ensuring a secure, low-swing fit whether you're climbing steel or organizing fasteners.
Color Options:
- Black: Flame-resistant #4 duck (Meets NFPA-701)
- White: Standard #4 duck canvas
Made in the USA and ready for the jobsite.
Smart tool storage with a compact footprint. The main bag features two compartments—including a dedicated holster for drills or screw guns, and a tool pouch ideal for quick-release clamps or hand tools.
Includes our patented 2-in-1 outer pouch, plus holders for driver bits and pencil, a leather sleeve for Clip-On accessories, and a rafter square slot behind the main pouch—square edge facing rear.
Made in the USA.
The Stronghold Master Carpenter Case delivers high-capacity organization in a compact, upright design. Crafted with a leather main body, water-resistant rubber base, and a hand-shaped leather handle, this tool tote is built for durability and ease of access.
Includes a removable 5042 Tape Holster, 9501 Clip-On Pouch, 2 Oxy Tool Shields, rafter square holster, and a side zip pouch for bits and small parts. Three internal compartments and 45 tool holders keep everything visible, accessible, and secure.
Made in the USA.
For professional drywallers, the ProFORMANCE™ Commercial Drywall Setup is organized to keep all your specialized tools within easy reach. The Commercial Drywall Case carries a circle cutter, metal snips, saw, knife, Surform®, and C-clamps, each in a dedicated holder.
The fastener side offers four pouches and six tool holders, including slots for a speed square, try square, and cat’s paw, so it adapts to your workflow and tool preferences.
A 3½" wide straight version of our ProFORMANCE™ belt, a little leaner than the contoured version for those who carry a lighter load or simply want a smaller belt. An overlay of the classic Occidental 2" leather belt makes for a more secure and comfortable workday.
Made in the USA.
Components:
Built for the demands of the trade, this rugged leather bolt bag features bull-pin loops on both sides and a tunnel loop that fits belts up to 3" wide. Its compact design keeps essential tools and hardware secure and accessible—ideal for structural and ironwork professionals.
Made in the USA.
The ProFORMANCE™ OxyLights Tool Belt Setup pairs our ProFORMANCE™ belt platform with our proven OxyLights™ bag system for lightweight performance, dependable support, and professional tool organization.
The ProFORMANCE™ belt combines a contoured padded liner with our classic 2" Extra Heavy Duty Work Belt made from premium USA-tanned bridle leather. The liner features a Dri-Lex® moisture-managing interior, durable 1000D Cordura® nylon exterior, and American-made closed-cell foam padding that maintains support without compressing over time.
Our OxyLights™ bags combine industrial nylon with trademark OxyRed™ leather reinforcement at key wear points. The leather also forms our NoSpill™ tool holder system, keeping tools secure while maintaining a lighter carry than all-leather setups.
This framing configuration includes a hammer holder, a tape holder and plenty of efficient organization for framing and general carpentry.
Made in the USA.
Set Components
Stronghold Journeyman’s Tote features a divided interior with 16 screwdriver loops, 9 center compartments, and multiple exterior pockets and loops to keep tools standing and organized.
Includes a leather luggage handle for comfortable carry, reinforced bottom for long-term use, and steel D-rings for optional shoulder strap attachment. Comes complete with a snap clip, clip-on location strap, and a 9501 Clip-On Bag for additional fastener storage.
Bonus: Two Oxy Tool Shields (Model 2003) included.
Made in the USA.
Maximum durability. Smarter organization.
Built for rugged capacity and refined layout—without sacrificing accessibility. The 10" deep main bag, paired with a full leather boot, offers unmatched durability, while the FatLip® leather-reinforced mouth keeps the bag open, structured, and protected from daily wear.
Its patented 2-in-1 outer bag integrates a built-in angle square holster, allowing fast access without adding bulk. Additional features include a tri-square sleeve, cat’s paw loop, and external pouches for driver bits or nail sets—making it a go-to for framing, drywall, and general construction.
Fastener Bags hold the tools and fasteners most often accessed with the non-dominant hand and are are typically worn on the non-dominant side of the body.
Left hand dominant version (worn on the right side) available in Hunter Green only.
Pocket Caddy – Compact 4-Pocket Tool Organizer | Made in USA
Get organized without the bulk. This compact 4-pocket Pocket Caddy is designed to fit right in your pocket—keeping essential tools like pliers, screwdrivers, and fasteners close at hand while protecting your tools or your clothes.
Perfect for small repairs, shop work, gardening, cabinetmaking, and farm maintenance, it turns any pocket into a tool carrier. A snap-loop attachment also lets you hook it onto belts up to 2" wide so you can leave the pockets for other things.
This 3-pouch beltless fastener bag provides efficient, organized storage without the need for a traditional belt. Designed to carry layout tools and fasteners used frequently on the job—like driver bits, angle squares, and cat’s paws—it’s an ideal match for Occidental’s Stronghold® Beltless System.
A dependable fastener-side pouch for framers, carpenters, and tradespeople who prioritize mobility and streamlined setup.
Made in the USA.
Carry your cat’s paw the way you want—secure, snug, and out of the way.
This handcrafted leather Cat’s Paw Sleeve Kit offers a clean, low-profile solution for tradespeople who prefer their tool tight to the body. Easy to install, this sleeve mounts to your existing pouch, vest, or tool rig using the included copper rivets and step-by-step instructions.
The sleek sleeve design keeps your tool secure while eliminating swing or bulk, making it ideal for high-mobility work like framing, roofing, and finish carpentry.
Made in the USA with premium leather and pro-grade durability.
Equipped with 2 of our 2003 - Oxy Tool Shield, to get you started (for sharp knife or chisel)!
Features
- Maximum Comfort
- Freedom of Movement
- Even Load Distribution
- Functional Organization
- Ergonomically Designed
- Made in USA!
Specifications
- Pockets & Tool Holders : 34
- Fits large frame 6' to 6'6"
Designed for right-side carry, the Clip-On Builders' Vest Tool Bag keeps your essential tools close and accessible. It features 9 pockets and holders for pencils, work knife, chisel, torpedo level, lumber crayon, and includes a heavy-duty hammer loop.
Built to clip directly onto the 2536 Builder’s Vest, this bag is reinforced with OxyRed leather corners for extra durability. Compact and efficient for streamlined jobsite use.
Made in the USA.
A streamlined belt system built for comfort and performance. This set features our FatLip® Bag design with 10" deep industrial nylon bags, reinforced with leather on the base and corners for long-term durability. The belt uses our original buscadero-style shape, updated with high-density neoprene, rugged nylon, and leather reinforcements for a supportive, flexible fit.
Includes a 2-in-1 Tool & Hammer Holder in the rear and an Oxy™ Tool Shield for sharp tool protection.
The Adjust-to-Fit™ system allows quick sizing changes to fit waist sizes 32" to 41", making it ideal for accommodating seasonal gear shifts.
Made in the USA.
The Pro Carpenter’s 5 Bag Tool Belt Setup combines durability, comfort, and layout efficiency in a unified design. Built with a buscadero-style one-piece leather belt, it distributes weight evenly and conforms to the body over time. Sheepskin lining adds all-day comfort, while copper rivets and top-grain leather construction ensure lasting performance in demanding conditions. This setup uses the proven 5060 fastener bag and 5018 tool bag layout, ideal for serious builders.
Made in the USA.
Compatibility: If you are using suspenders with this set, you will need the DAK - Direct Attachment Kit to connect them.
Hand Crafted in the USA Since 1980
Hand Crafted in the USA Since 1980