Search results
39 results
Search results
The SuspendaVest™ OxyLight™ Package delivers maximum comfort and balanced carry for framing, electrical, concrete, or trim work. This high-performance vest distributes weight evenly across the shoulders, reducing lower back strain while keeping your most-used tools close at hand. Fully adjustable, quick to snap on/off, and equipped with a heavy-duty hanging “D” ring for off-the-clock storage.
Available in setups optimized for Lefties or Right handed builders
Components:
Quick disconnect 3" wide leather belting accepts any tool bag with a tunnel loop up to 8.5" across. Create a custom rig to fit your specific work habits and needs. You may remove your bags from the SuspendaVest™ for finish work or work in tight spaces. Give your body a break, alternate with this belt free system.
The SuspendaVest may be used for framing, electrical, concrete or trim applications. Fully adjustable with extra pockets behind the tool holders for hands or gloves. Snaps on and off in seconds with a quick release chest strap buckle. Features a “D” ring for hanging storage!
Features
- Maximum Comfort -Wide padded shoulder support lined with Dri-Lex to wick away perspiration.
- Freedom of Movement - All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution - Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter - 17 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed - Lessen fatigue and help prevent lower back pain!
- Made in USA!
Specifications
- Pockets & Tool Holders : 17
- One Size Fits Most
- Weight : 3.0 lbs.
- Note: Due to extra wide hangers, the SuspendaVest does not accommodate the 5525 or B5611 bags.
- Caution: One size does fits most but if the user is XXL or more the vest might not be able to adjust enough to fit.
Also available for lefties in LH option here.
The SuspendaVest may be used for framing, electrical, concrete or trim applications. Fully adjustable with extra pockets behind the tool holders for hands or gloves. Snaps on and off in seconds with a quick release chest strap buckle. Features a “D” ring for hanging storage!
Features
- Maximum Comfort: Wide padded shoulder support lined with Dri-Lex® to wick away perspiration.
- Freedom of Movement: All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution: Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter: 17 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed: Lessen fatigue and help prevent lower back pain!
Specifications
- Pockets & Tool Holders : 17
- One Size Fits Most
- Weight : 3.0 lbs.
Caution: One size does fits most but if the user is XXL or more the vest might not be able to adjust enough to fit.
The SuspendaVest may be used for framing, electrical, concrete or trim applications. Fully adjustable with extra pockets behind the tool holders for hands or gloves. Snaps on and off in seconds with a quick release chest strap buckle. Features a heavy duty "D" ring for hanging storage.
Features
- Maximum Comfort: Wide padded shoulder support lined with Dri-Lex to wick away perspiration.
- Freedom of Movement: All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution: Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter: 36 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed: Lessen fatigue and help prevent lower back pain!
- Made in USA!
Specifications
- Pockets & Tool Holders : 36
- One Size Fits All
- Weight : 5.7 lbs.
Also available for lefties in LH option here.
The OxyLights™ Framer Set combines industrial nylon and leather for a lightweight, durable tool belt system. Designed for framing and general carpentry, this set includes two three-pouch bags, a hammer holder, and a heavy-duty Ranger Work Belt. Padded nylon pouches hold their shape, and reinforced leather corners increase longevity.
Left-handed version is available in Hunter Green only.
Special Edition Multicam® available now!
Made in the USA.
Belt Set Components
The ProFORMANCE™ OxyLights Tool Belt Setup pairs our ProFORMANCE™ belt platform with our proven OxyLights™ bag system for lightweight performance, dependable support, and professional tool organization.
The ProFORMANCE™ belt combines a contoured padded liner with our classic 2" Extra Heavy Duty Work Belt made from premium USA-tanned bridle leather. The liner features a Dri-Lex® moisture-managing interior, durable 1000D Cordura® nylon exterior, and American-made closed-cell foam padding that maintains support without compressing over time.
Our OxyLights™ bags combine industrial nylon with trademark OxyRed™ leather reinforcement at key wear points. The leather also forms our NoSpill™ tool holder system, keeping tools secure while maintaining a lighter carry than all-leather setups.
This framing configuration includes a hammer holder, a tape holder and plenty of efficient organization for framing and general carpentry.
Made in the USA.
Set Components
The OxyLights™ Ultra Framer is a 7-pouch tool belt set designed for builders who demand performance without extra weight. Combining industrial nylon with reinforced leather components, this setup offers durability, structure, and comfort in a lighter form. The B8017DB tool bag pairs with the B8064 fastener bag, which includes our 2-in-1 outer pouch for streamlined access to fasteners and gear.
Made in the USA.
Available in setups optimized for Lefties or Right handed builders
Components:
The OxyLights™ 7-Bag Framer Tool Belt offers the most pouches in the OxyLights Series. This setup mirrors the layout of the 5089 leather system but is built using a blend of abrasion-resistant industrial nylon and top-grain leather to reduce weight without sacrificing durability.
OxyRed™ leather reinforces stress points and provides secure NoSpill™ tool holders. Designed with hand-specific layout for smooth workflow.
Available in configurations for left- or right-handed builders.
Made in the USA.
Components:
The OxyLights™ Fastener Bag with Double Outer Bags offers high-capacity organization in a compact layout. Its patented* 2-in-1 outer pouch features an angle square holster between the main and outer compartments, while the upper pouch adds fast access to layout tools.
Built for framing and general carpentry, this USA-made bag includes dedicated holders for a tri-square, cat’s paw, driver bits, and more.
Meet the Special Edition Multicam® OxyLights™ Framer Setup — a bold new colorway in one of our most popular tool belt systems. This set combines industrial nylon and leather for a lightweight, durable tool belt system. Designed for framing and general carpentry, this set includes two three-pouch bags, a hammer holder, and a heavy-duty Ranger Work Belt. Padded nylon pouches hold their shape, and reinforced leather corners increase longevity.
Made in the USA.
Belt Set Components
The OxyLights 4 Pouch Fastener Bag adds an extra outer pouch to the classic 8060 layout, offering increased organization for framing and general carpentry tasks.
With 10 tool holders and pouches—including dedicated storage for squares, driver bits, and cat’s paws—this bag delivers efficient access without adding bulk. Lightweight yet durable, and built to wear on your non-dominant side.
Made in the USA.
The most popular bag in the OxyLights™ line, this 3-pouch leather tool bag provides smart storage without extra bulk. It includes holders for pencils, work knife, lumber crayon, chisel, torpedo level, and hammer, along with a built-in tape holster sized for up to a 35' FatMax.
Available in left- or right-hand configurations to suit your workflow.
Lefty option available in Hunter Green only.
Made in the USA.
Special Edition Multicam® now available!
The Stronghold Comfort Package bundles the 5055 Stronghold Suspenders with the 9008 Hip Buddies for all-day comfort under a loaded tool belt.
The suspenders carry the load up top. A padded, contoured yoke lined with moisture-wicking Dri-Lex spreads the weight across your shoulders and keeps the straps in place, taking strain off your hips and lower back while you stay cooler and drier. Chest pockets keep small tools within reach, and the heavy-duty center D-ring lets you hang up the whole rig when you take it off.
The Hip Buddies take care of the belt. These lightweight, high-density cushion pads slide onto any belt up to 3" wide and add padding at the hips without adding bulk. They accept bags up to 7.5" wide and are sold as a pair.
Together they give you support at the shoulders and cushioning at the hips, built for full days under a full load. Available in OxyRed and OxyBlack.
Made in the USA.
Compatibility Note: the Stronghold Comfort Package will not accommodate the following bags and systems:
- 5525 Big Oxy Fastener Bag & B5611 Green Building Fastener Bag
- All Adjust-to-Fit systems
- ProFORMANCE Belt Sets
- All Stronghold Comfort Belts or Comfort Belt Systems
⚠️ Note: D-ring not rated for safety harness use
The SuspendaVest may be used for framing, electrical, concrete or trim applications. Fully adjustable with extra pockets behind the tool holders for hands or gloves. Snaps on and off in seconds with a quick release chest strap buckle. Features a heavy duty "D" ring for hanging storage!
Features
- Maximum Comfort: Wide padded shoulder support lined with Dri-Lex to wick away perspiration.
- Freedom of Movement: All straps fully adjustable to comfortably fit most builders.
- Even Load Distribution: Carry Tools and equipment with equal weight distribution.
- Freedom From Tool Clutter: 36 pockets and tool holders keep your most commonly used tools at your fingertips.
- Ergonomically Designed: Lessen fatigue and help prevent lower back pain!
- Made in USA!
Specifications
- Pockets & Tool Holders : 36
- One Size Fits All
- Weight : 5.7 lbs.
- Available for right handed builders as 2550
Designed for metal framing, finish carpentry, and remodeling work, the OxyLights™ Driver Set balances durability with reduced weight. It features our right-side gun/finisher bag (8068) with a holster for impact or screw guns, plus compartments for quick clamps and related tools.
The left-side bag (B8064) includes a double outer pouch layout for fasteners or small tools. Built with abrasion-resistant industrial nylon and reinforced with leather at key points for extended service life.
Made in the USA.
Components:
This is our most popular OxyLights™ Fastener Bag, now available in a striking Multicam®, built for framing and general carpentry. With a streamlined design and lightweight construction, it’s ideal for those who want maximum functionality without the extra weight. Includes dedicated holders for a 1” blade square, angle square, cat’s paw, driver bits, and more.
Made in the USA.
The OxyLights™ 3 Pouch Tool Bag offers efficient, lightweight carry with the durability tradespeople count on. It features holders for pencils, work knife, chisel, level, and lumber crayon, along with a heavy-duty hammer loop. Main bag corners are reinforced with our signature OxyRed™ leather for added longevity.
Available in configurations for left or right-handed builders.
Made in USA!
Designed to reduce strain without adding bulk, the Stronghold Light Suspenders deliver dependable support in an ultra-lightweight package. Built from industrial-grade nylon with leather loop attachments and heavy-duty spring clips, they’re ideal for long days on the job when comfort and mobility matter.
Chest-height pockets keep pencils or clip-on tools within easy reach, while the streamlined design pairs cleanly with Stronghold and compatible belts.
Installation note: For installation on additional belts, use Installation Kit #5509.
Compatibility: If you are going to use suspenders with the 5191 - Pro Carpenter's 5 Bag Tool Belt Setup, you will need the DAK - Direct Attachment Kit to connect them.
Designed for durability and efficient access, this round-bottom fastener bag offers a deep main pouch and layered outer storage. It includes holders for a tri-square, cat’s paw, driver bits, angle square, and a tape pocket that fits up to a 35’ tape.
Includes the Oxy Tool Shield for safe storage of sharp tools.
Compatibility Note: Fits the HD 3" Ranger Leather Work Belt, 2" Leather Work Belt. The side-by-side upper pouch and tape holster require a wider upper hanger on this one, so it will not fit the ProFormance and Stronghold Comfort belts or the Suspendavest or other beltless systems.
Made in the USA.
The OxyLights™ 2-Pouch Tool Bag delivers efficient tool storage in a lightweight format. Based on the 8018 design but without the tape pocket, this pouch includes holders for essentials like a work knife, pencils, lumber crayon, chisel, torpedo level, and hammer—organized in a compact, two-pouch layout.
Built for pros who want all-leather durability without extra weight.
Made in the USA.
Hand Crafted in the USA Since 1980
Hand Crafted in the USA Since 1980